After Use; Cleaning And Maintenance - Thane Fitness H2O iGO User Manual

After Use

Always make sure the Water Tank is empty after use;
1. Turn the Power Switch (O/I) to the "OFF" position (O).
2. Release any residual steam/pressure from the Water Tank by turning the Steam Valve Dial to High Steam position.
3. Unplug the Power Cord from the electrical outlet (if using the corded version).
4. Make sure to remove the Mop Cloth before storage. Allow it to cool down before carefully removing the cloth.
!
CAUTION Before removing a Microfiber Cloth from the H2O iGO™ Hybrid Steam Mop, turn
the unit off, unplug it from the electrical outlet (if using the corded version) and make certain that
steam is no longer coming from the Mop Head.
5. Always empty the Water Tank at the end of each use and drain any left-over water or steam before storing.
6. Wrap the Power Cord around the Cord Hook on the Curved Handle.
7. Wipe all surfaces of the H2O iGO™ Hybrid Steam Mop with a soft cloth.
8. Store the unit in a protected and dry area.
23

Cleaning and Maintenance

!
CAUTION Always turn off and unplug the H2O iGO™ Hybrid Steam Mop when cleaning or
performing any other user maintenance.
!
Do not handle the plug or the H2O iGO™ Hybrid Steam Mop with wet hands or
WARNING
operate without shoes. Do not immerse the H2O iGO™ Hybrid Steam Mop in water or other liquids.
• The H2O iGO Steam Mop Unit Body and Mop Head can be wiped down with a soft cloth if they get dirty. Never immerse
the unit in water to clean it.
• The Microfiber Cloth can be machine washed at 60ºC/140ºF, but without bleach or fabric softener and should be left
to air dry.
• The H2O iGO™ Hybrid Steam Mop does not require frequent maintenance cleaning with descaling solution in order to
prevent limescale blockage. Therefore, it is enough to use regular water to clean the unit after use.
• It is possible to have some limescale form in the Water Tank, and in that case, the following instructions need to be
followed. This process can be done once after every 25 uses of the full Water Tank or as often as once a month in
areas with hard water.
1. Add 1-2 tablespoons of white vinegar to a full Water Tank, close the Water Tank Safety Lid (all the way) and shake
the contents. DO NOT TURN THE STEAMER ON.
2. Let the unit sit for a few hours, then empty the Water Tank and rinse with clean water until it rinses clear.
24