► Turn the bulb holder a eighth of a turn anti-
clockwise and remove it.
► Remove the bulb and replace it.
Amber coloured bulbs, such as the
direction indicators, must be replaced
by bulbs with identical colour and
specifications.
Beam headlamps
► Remove the protective cover by pulling on
the tab.
► Disconnect the bulb connector.
► Release the retaining tab.
► Change the bulb taking care to align the
metal part with the grooves on the lamp.
► Reposition the retaining tab.
► Reconnect the bulb connector.
► Ensure that the cover is refitted correctly all
around to ensure correct sealing.
Front foglamps (H16-19W)
(Depending on version)
► Remove the front mud guard.
► Disconnect the connector.
► Release the snap fit, rotate anticlockwise
and remove the bulb.
Rear lamps
Model 1
1. Tail / Brake lamps (P21/5W)
2. Direction indicators (PY21W)
3. Reversing lamp (P21W) (LH side only)
4. Dummy lamp
In the event of a breakdown
Model 2
1. Tail / Brake lamps (P21/4W)
2. Direction indicators (PY21W)
3. Reversing lamp (P21W) (LH side only)
4. Connecting tail (W5W)
Changing bulbs
These bulbs are changed after removing the tail
lamp assembly.
► Open the boot.
► Open the carpet flap to access the tail lamp
mounting nut.
► Unscrew the nut and remove it. Be careful
not to drop it inside the vehicle.
► Unscrew the two mounting bolts near the
tail gate area.
► Unclip the lamp unit and carefully extract it
pulling straight towards the outside.
A standard pair of pliers or the wheel wrench
(depending on equipment) may be necessary to
remove the nut.
8
57