Programs Table; Setting The Washing Program And Switching On; Program In Progress Indicator Light - Smeg DI6013 Instruction Manual

User instructions

PROGRAMS TABLE

The manual contains the programs table for several models. To find the
table for your dishwasher, compare the program symbols at the top of the
table with those on your control panel.

SETTING THE WASHING PROGRAM AND SWITCHING ON

After identifying the most suitable program with the aid of the programs
table:
•
Press the ON/OFF button (1) and wait for the PROGRAM
INDICATOR LIGHT (2) to illuminate;
•
Keep pressing the PROGRAM SELECTION button (3) until the
indicator light corresponding to the desired program illuminates;
•
select the option required (if any and if the model provides options);
•
close the door; after about 2" the program will start LIGHT will
flashing (indicating that the program is being executed).
Some components are live even with the ON/OFF button in the OFF
position. Before maintenance work on the appliance, remove the plug or
turn off the power supply at the wall switch.

PROGRAM IN PROGRESS INDICATOR LIGHT

When a program is running, a flashing light is projected onto the floor
under the right-hand corner of the door. At the end of the program, the
light stops flashing and remains on.
11