Related Manuals for Atlanta LC-100
Summary of Contents for Atlanta LC-100
- Page 1 LC-100 User Manual DATE OF PUBLISHING: 15 APRIL, 2016 MANUAL VERSION # C100_V0.1 www.atlantasys.com...
-
Page 2: Table Of Contents
Table of Contents 1.PACKAGING CONTENTS ..........2.PRECAUTIONS ..............3.INSTALLATION PROCEDURE ........3 - 5. 4.SMS COMMANDS DISCRIPTIONS ......... 5 - 9. 5.WIRING DIAGRAM ............6.TROUBLE SHOOTING ........... www.atlantasys.com... -
Page 3: Packaging Contents
13. Vehicle control function (Ignition off/on) can be started /stopped by the user. 14. Easy installation and easy SMS commands. 15. If wrong SMS command sent by the user then, LC-100 will delete SMS and send “SMS NOT ACCEPTED” to user mobile number. -
Page 4: Precautions
Precautions: • While washing the engine, protect the LC-100 by all suitable means from being struck directly by water jet or flow. • The GSM operations are dependents on the Network availability. • Postpaid/Prepaid SIM card can be used. • Pay special attention to the amount of remaining credit & expiry date of mobile connection in case of prepaid SIM card. - Page 5 Installation Diagram: LED Indicator Open Flap Sim Slot Sim Slot Open Flap To Insert Sim Insert Sim Here www.atlantasys.com...
-
Page 6: Sms Commands Discriptions
SMS Commands Description: LC-100 would accept commands from any number if the password provided is correct. The password is a four digit number. The users can change the password of their device. LC-100 would reply to all commands send by user. - Page 7 • DISARM<password> - LC-100 will stop monitoring the vehicle. It will stop sensing the input, Start the ignition and fuel of the vehicle a conformation massage “ARM MODE HAS BEEN DEACTIVATED” will be received. Apn Configuration • #CONFIG::APN::username::password;<password> – This command is used to configure your GPRS account.
- Page 8 Example – when we send the command DBT5OOM<6906>, LC-100 will start sending the data to web server at every 500 meters and on deviation of 30 degree from the normal course.. • SDBT<password> :- this command will stop the distance and angle based tracking...
- Page 9 Diagnosis commands • SYSSTATUS<password> Response: Main power status MPON MPOFF Ignition status IGNON IGNOFF Immobilizer status DISARM A/C status A/C OFF A/C OFF DOOR status DOOR CLOSED DOOR CLOSED Reserved low sense input LS HIGH(R) LS HIGH® Reserved Field DBON Reserved Field DIPOFF Odometer(KM)
- Page 10 SMS Alerts from device SYSSTARTZ::+919876543210;<password> This command is used to register the device with Subscriber number. Now device will send Alerts to the number +919876543210. Confirmation message “SYSTEM START HAS BEEN ACTIVATED” will be received. Also the tracker would answer to calls from this number. SYSSTOPZ<password>...
-
Page 11: Trouble Shooting
“WRONG COMMAND” resend. • Check your balance in case of Pre Paid connection. • Check the network status. (No or weak network connection could No response from LC-100: be the reason) • Resend the desired commands again. • Reset the LC-100. - Page 12 M-135,2nd Floor ,near Laxmi Vilas Bank Opposite Shankar market Connaught Place New Delhi-110001 +91-11-49039700(100 lines), +91-9990333888 enquiry@atlantasys.com www.atlantasys.com...
Need help?
Do you have a question about the LC-100 and is the answer not in the manual?
Questions and answers