Atlanta L-100 User Manual

USER MANUAL
L-100
USER MANUAL
L-100
Innovative ICT Solutions
Model No.
L-100
MANUAL VERSION # L100_V0.1
Table of content

1. INTRODUCTION--------------------------------1

2. PACKAGING CONTENTS--------------------2

3. PRECAUTIONS ---------------------------------3

4. INSTALLATION PROCEDURE-------------4

5. SMS COMMANDS DISCRIPTION------------5
6.TROUBLE SHOOTING-------------------------6
PACKAGING CONTENTS:
Unpack the L-100 Box carefully, in the package
you may find:
1. L-100 Tracking Device

2. Wiring harness

3. Fuse
4. Relay with socket *
5. Panic button*
6. User manual
v Note-Some of the accessories shown above are
optional and need to be purchased separately
Features
1. High sensitive GPS chipset.
2. Combination of GPS, GSM/GPRS wireless
network.
3. Durable and highly reliable GPS tracker.
4. Easy to install or hide in the vehicle to perform
tracking.
5. Ideal for vehicle tracking and equipment/assets
monitoring.
6. External DC power supply.
7. Configuration can be done via SMS commands.
8. Real-time GSM/GPS location monitoring on SMS
and website.
9. Vehicle control with Immobilization.
10.Generation of reports on web-site in html/xls
format. Reports include drive/stop summary,
performance (based on speed), detail (with time,
date, latitude, longitude, speed).
11.Replay and analysis of trip logs.
12.Add on users with customized access to web
4
accounts
13.Door sense.
14.Vehicle control function (Ignition off/on) can be
started /stopped by the user..
1. GPS
15.Easy installation and easy SMS commands.
2. GSM
16.If wrong SMS command sent by the user then, L-
3.
BATTERY STATUS
100 will delete SMS and send "SMS NOT
4. USB
ACCEPTED" to user mobile number.
5. SIM
17.User would get a map link on mobile with
6.
WIRING HARNESS
Latitude /longitude.
18.Over The Air (OTA) software updation.
19.User can take the ODOMETER reading on Mobile get
as well as on website.
20.Panic Button can be used to generate SMS in\
1
case of emergency.*
*Note:-This function will work if you have additionally
2
purchased the Panic Button Kit.
3 PRECAUTIONS:
While washing the engine, protect the L-100 by all
suitable means from being struck directly by water jet
or flow.
The GSM functionalities are dependent on the network.
postpaid/prepaid SIM card can be used.
Pay special attention to the amount of remaining credit
& expiry date of mobile connection in case of prepaid
SIM card.
"ARM MODE" commands will immediately bring the
vehicle to a sudden halt. Hence, we strongly
20.
recommend that these commands should not be used
when vehicle is moving, as sudden stop may result in
some mishappening.

HARDWARE DESCRIPTION:

a. Power Requirement: 8V to 40V
5
b. Normal operation temperature: -30°C to +80 °C
6
c. Restricted operation temperature: Above -40°C
and below +85 °C
d. Storage temperature: -45°C to +90°C
e. Humidity: 5% to 95%
INSTALLATION PROCEDURE:-
Steps:-
Set up the required wiring as per the wiring diagram
using the Harness and Fuse provided in the package
· Open the Green strip as shown.

LED Indication

· RED: Battery charging indication, ON
charging, Blinking
· GREEN: GSM indication, ON
Blinking at every sec.
· BLUE : GPS indication, ON
at every sec. GPS FIX
à

SMS COMMANDS DESCRIPTION:

1. PW::1234;<password> - This command is used to
change the password. After this command the
· Insert SIM card in to the SIM Slot as shown, make
password will be 1234
sure that the mobile number is recorded
2. SYSSTARTZ::+919876543210;<password>
· LED indicator started glowing, if the internal
This command is used to register the L-100 with
Battery is charged
Subscriber number. Now L-100 will send alerts to the
v Note:- Inserting SIM card will switch ON the device
number +919876543210. Confirmation message
so remove the SIM card if the device is not fitted to
"SYSTEM START HAS BEEN ACTIVATED" will be
vehicle to save internal battery.
received.
· Connect the device to the wired harness and wait for
3. SYSSTOPZ<password>
Indicators.
This command is used to stop the system with
· Within 10 to 40 seconds,the unit will begin to work LED Indication
Subscriber number. (Now a new number can be
and acquire the GSM signal as well as the GPS
registered with L-100).
signals.The GSM indicator (GREEN LED) will flash
4. IMEI<password> -L-100 will display International
when the unit has registered with GSM network.
Mobile Equipment Identity Number (15 Digits).
5. ARM<password> -L-100 will start monitoring the
· Once the GPS signal is valid. The GPS indicator
vehicle. It will start sensing the doors & ignition, cut
(BLUE LED) starts blinking.
the ignition of the vehicle and confirmation message
· Both the indicators would be "ON", if no GSM &
"ARM MODE HAS BEEN ACTIVATED" will be
GPS signal available.
received.
· RED LED- Indicates the battery charging, if LED is
7.#CONFIG::APN::username::password;<password>
ON means Battery charging, Blinking means
–This command is used to configure GPRS
battery FULL
settings
· Use the following SMS commands to configure
APN (access point name) which is used to get to the
and start tracking.
GPRS gateway provided by network operator.
Battery
à
Battery charged.
à
out of network,
à
GSM signal available.
à
GPS NOT FIX, Blinking
à