Table of Contents
Advertisement
ASSEMBLY
Inlet Cap
Canister
Lid
6 Push the Inlet Cap into position in
the Ice/Salt Inlet.
7 Carefully pull the Drinks Tray out from
the Motor Base until it is fully extended.
USING THE MACHINE
Making SLUSH PUPPiES
Are you ready? Feeling thirsty?
Let's make some SLUSH PUPPiES
1 Plug the SLUSH PUPPiE
Machine into an appropriate mains
power supply and check that it is
switched on at the socket.
2 Press the Mix/Off/Dispense
switch to position I (Mix).
x2
5 Pour 2 inlet caps of salt into the
Ice/Salt Inlet.
IMPORTANT
Add salt to the Ice Canister only. The
salt will not be consumed; it is used to
stop the ice mix from rapidly freezing.
Ice/Salt Inlet
®
!
®
Tap in closed
position
3 Ensure the Tap is in the
®
closed position.
IMPORTANT
It is very important that your
SLUSH PUPPiE
before you add ice; otherwise the
motor or blade could freeze.
6 Pour 40ml of water into the Ice
Canister through the Ice/Salt Inlet.
Motor Base
Drinks Tray
Watch a Video
For top tips and guidance on
making perfect SLUSH PUPPiES
a video can be found at:
fizzcreations.com/slush-puppie-help
or simply scan here.
4 Remove the Inlet Cap and half fill
the Ice Canister with ice through
the Ice/Salt Inlet. This is indicated
by the ICE and SALT marker on
the Canister Lid.
Machine is working
®
40ml
7 Fill the rest of the Ice Canister with
ice cubes through the Ice/Salt Inlet.
Note: The ice level should be at least
3cm below the rim of the Ice Canister.
SLUSH PUPPiE
®
MACHINE – INSTRUCTIONS FOR USE
®
5
Advertisement
Table of Contents
