Table of Contents
Advertisement
TIP: Using Your SLUSH PUPPiE
Your SLUSH PUPPiE
PLEASE NOTE that the SLUSH PUPPiE
DO NOT exceed the maximum capacity of 1 litre of liquid in the SLUSH PUPPiE
level on the front of the container. This will result in the liquid overflowing into the Ice Canister, mixing with the salt and ice.
ASSEMBLY
It's almost time for some SLUSH PUPPiES
First, let's get the SLUSH PUPPiE
DO NOT plug the power cord into the mains electrical supply until the SLUSH PUPPiE
the first time, clean any removable parts with a soft sponge and washing up liquid. Thoroughly rinse with clean water and dry.
SLUSH PUPPiE
®
Container
Tap
Motor Base
Drinks Tray
1 Insert the SLUSH PUPPiE
Container onto the Motor Base.
Make sure the Coupler on the
SLUSH PUPPiE
®
correctly aligned with the Drive
Sprocket and slots firmly into
position. The Tap should sit directly
above the Drinks Tray.
Hexagonal
Socket
®
SLUSH PUPPiE
Container
4 Insert the assembled Ice Canister
into the SLUSH PUPPiE
Make sure the Hexagonal Socket
on the Ice Canister aligns with the
top of the Coupler in the SLUSH
PUPPiE
Container and slots firmly
®
into place.
4
SLUSH PUPPiE
MACHINE – INSTRUCTIONS FOR USE
®
Machine can make a maximum of 1 litre of SLUSH PUPPiE
®
®
Coupler
Ice Canister
Cage
Drive
Sprocket
Ice Canister
2 Insert the Ice Canister Cage
®
into the Ice Canister. Make sure
the Hexagonal Socket on the
Container is
Ice Canister Cage aligns with
the Hexagonal Mount in the Ice
Canister.
Ice Canister
5 Fit the Canister Lid into
Top of
Coupler
Container.
®
Machine
®
mix will reduce in volume when the slush starts to form.
®
.
®
Machine ready for action...
place. Make sure the
SLUSH PUPPiE
logo
®
is at the front and the
text displaying FRONT
on the Canister Lid is
facing forwards. Place
the canister lid so it lines
up with the top of the
canister. Push down until
you hear a click on the
side latches, securing
the canister lid in place.
To remove, push the
side latches in to release
the lid.
mix in one go.
®
Container as indicated by the 'Max Fill'
®
Machine is fully assembled. Before using for
®
Ice Canister
Cage
Indent
Hexagonal
Ice Paddle
Socket
Assembly
Hexagonal
Mount
3 Insert the Ice Canister complete
with Ice Canister Cage into the Ice
Paddle Assembly so that the Clips
line up with the 3 Indents. Make
sure the Ice Canister is correctly
seated. Carefully push each Clip
into place. A loud 'click' will indicate
each Clip is securely in position.
Side Latch
Canister
Lid
Clips
Ice
Canister
Indents
Mount on
underside of
Canister Lid
Central Spindle
of Ice Paddle
Advertisement
Table of Contents
