Related Manuals for Fizz Creations Slush Puppie
Summary of Contents for Fizz Creations Slush Puppie
- Page 1 SLUSH PUPPiE MACHINE ® Instructions For Use Product Ref: 9041_v7 Voltage: 220-240V 50/60Hz. Power: 20 Watts.
- Page 2 Scan me for the instruction video and top tips for the perfect SLUSH PUPPiE slushpuppie.fizzcreations.com – Instructions For Use SLUSH PUPPiE ®...
- Page 3 Please take the time to read these instructions carefully and keep them for future reference. They have been written to ensure you’ll be making perfect Slush Puppies in no time at all. You’ll soon have that famous coloured tongue look! Instructions For Use – SLUSH PUPPiE ®...
-
Page 4: Table Of Contents
Before You Begin – Remove Packaging – What’s in the box – What you will need – Tips on using your SLUSH PUPPiE Machine Assembly ................. 15-20 Using the Machine ............21-28 – Making Slush Puppies – Dispensing Slush Puppies Storage and Maintenance .......... -
Page 5: Safety Information
Safety Information Instructions For Use – SLUSH PUPPiE ®... - Page 6 Safety Information Please read these instructions carefully before assembling and using your SLUSH PUPPiE Machine. We recommend you keep these instructions in a safe place for future reference. 8 NEVER use any attachments or tools 8 NEVER let the power cord hang over...
- Page 7 The SLUSH PUPPiE Machine can be used by children aged 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction covering use of the appliance in a safe way and understand the hazards involved.
-
Page 8: Safety Information
Safety Information Electrical Safety Please read these instructions thoroughly before using the SLUSH PUPPiE Machine or connecting it to the mains electricity supply. • A 3 amp BS1362 ASTA approved fuse • The mains lead of the SLUSH PUPPiE must be fitted. -
Page 9: Before You Begin
Before You Begin Instructions For Use – SLUSH PUPPiE ®... -
Page 10: Remove Packaging
You’re almost ready to start making Slush Puppies. There a few small things to do before you begin… Remove Packaging Carefully remove all packaging material and promotional labels from the SLUSH PUPPiE Machine. What’s in the box In the box you will find... - Page 11 Slush Puppie Container Motor Base Slush Puppie Container Motor Base 10. Slush Puppie Container 14. Motor Base 11. Locking Notch 15. Drive Sprocket 12. Tap Handle 16. Mix/Off/Dispense Switch 13. Tap 17. Drinks Tray Instructions For Use – SLUSH PUPPiE ®...
-
Page 12: What You Will Need
– Cola – Green Apple • Once you've chosen a flavour, make the SLUSH PUPPiE syrup mixture in a jug that will hold at least 1 litre of mixture. Carefully follow the instructions on the syrup bottle. To make 1 litre of SLUSH PUPPiE, mix 835 ml of water to 165 ml syrup. - Page 13 Ice 7 Ice/Salt Inlet Caps. PUPPiE Cups (9oz). Canister. This is equivalent to approximately 170g NOTE: The salt will not be consumed; It is used to stop the ice mix from rapidly freezing. Instructions For Use – SLUSH PUPPiE ®...
-
Page 14: Before You Begin
Using Your SLUSH PUPPiE Machine • Your SLUSH PUPPiE Machine can make a maximum of 1 litre of Slush Puppie mix in one go. PLEASE NOTE that the Slush Puppie mix will reduce in volume when the slush starts to form. -
Page 15: Assembly
Assembly Instructions For Use – SLUSH PUPPiE ®... - Page 16 Assembly It’s almost time for some Slush Puppies. First, let’s get the SLUSH PUPPiE Machine ready for action… DO NOT plug the power cord into the mains electrical supply until the SLUSH PUPPiE Machine is fully assembled. Before using for the first time, clean any removable parts with a soft sponge and washing up liquid.
- Page 17 3 Indents. Make sure the Ice Canister Ice Canister is correctly seated. Carefully push each Indent Clip into place. A loud ‘click’ will indicate each Clip is securely in position. Ice Paddle Indents Assembly Instructions For Use – SLUSH PUPPiE ®...
- Page 18 Assembly Insert the assembled Ice Canister into the Ice Canister Slush Puppie Container. Make sure the Hexagonal Socket on the Ice Canister aligns with the top of the Coupler in the Slush Puppie Container and slots firmly into place. Hexagonal Socket...
- Page 19 Push the Inlet Cap into position in the Inlet Cap Ice/Salt Inlet Ice/Salt Inlet. Canister Lid Carefully pull the Drinks Tray out from the Motor Base until it is fully extended. Motor Base Drinks Tray Instructions For Use – SLUSH PUPPiE ®...
- Page 20 Assembly – Instructions For Use SLUSH PUPPiE ®...
-
Page 21: Using The Machine
Using the Machine Instructions For Use – SLUSH PUPPiE ®... -
Page 22: Making Slush Puppies
• Put the Ice Canister in the freezer for 1 hour. • Made sure the Slush Puppie Container and Canister Lid are firmly in place. A loud 'click' indicates the Canister Lid is securely in place. – Instructions For Use SLUSH PUPPiE ®... - Page 23 Using the Machine Lets Plug the SLUSH PUPPiE Machine into an appropriate mains power supply and check that it is switched on at the socket. Press the Mix/Off/Dispense switch to position I (Mix). IMPORTANT It is very important that your SLUSH PUPPiE Machine is working before you add ice;...
- Page 24 Ice/Salt Inlet. Fill the rest of the Ice Canister with ice cubes through the Ice/Salt Inlet. Note: The ice level should be at least 3 cm below the rim of the Ice Canister. – Instructions For Use SLUSH PUPPiE ®...
- Page 25 Pour a further 40 ml of water into the central Ice Canister. 10. Re-fit the Inlet Cap into position on the lid. 11. Slowly pour your Slush Puppie syrup mixture through the Syrup Inlet at the rear right of the Canister Lid. This is indicated by the BEVERAGES HIGH IN SUGAR CONTENT ONLY marker on the Canister Lid.
- Page 26 Using the Machine 12. Leave the SLUSH PUPPiE Machine running for approximately 15-25 minutes. DO NOT leave the SLUSH PUPPiE Machine unattended or exceed the running time (40 minutes). The amount of time until the desired consistency is reached will depend on the ambient temperature.
- Page 27 Using the Machine 14. To create perfect Slush Puppies, wait until peaks form in the Slush Puppie mixture before dispensing. Note: After using the SLUSH PUPPiE Machine wait at least 15 minutes before using again. This will allow the motor to cool.
-
Page 28: Dispensing Slush Puppies
The mixture will start to pour. To stop dispensing, turn the Tap Handle anti-clockwise. When you have finished, press the Mix/Off/ Dispense switch to Off (Position O). Tap in open position – Instructions For Use SLUSH PUPPiE ®... -
Page 29: Storage And Maintenance
Storage and Maintenance Instructions For Use – SLUSH PUPPiE ®... -
Page 30: Cleaning And Care
Mix/Off/Dispense switch set to Off (Position O). To clean your SLUSH PUPPiE Machine: Unplug the SLUSH PUPPiE Machine from the mains electricity supply and allow it to cool completely. Remove all detachable parts. Note: When removing the Canister Lid, press the Clip and the rear inwards to release the Canister Lid. -
Page 31: Storage
SLUSH PUPPiE Machine to be exposed to rain or moisture during use or storage. Servicing If you drop or damage your SLUSH PUPPiE Machine DO NOT use it until it has been examined by an authorised service centre or appliance technician. Servicing must only be carried out by qualified service personnel. - Page 32 Storage and Maintenance Troubleshooting If your SLUSH PUPPiE Machine is not working as expected you may find a simple solution listed below: Whats is happening? What it could be The motor is not • The blade may have become frozen. Turn the SLUSH PUPPiE spinning Machine off, move the frozen blade and restart the machine.
-
Page 33: Storage And Maintenance
• You can use any drink with a high sugar level longer than 40 minutes of continuous use. in your SLUSH PUPPiE Machine such as fresh orange juice or fizzy cola. • Consume Slush Puppies as soon as they have been served. - Page 34 ” “ ICE WORK... lets slurp our Slush Puppie – Instructions For Use SLUSH PUPPiE ®...
- Page 35 ” Instructions For Use – SLUSH PUPPiE ®...
- Page 36 This device may not cause harmful interference. This device must accept any interference received, including interference that may cause undesired operation. © 2017 SLUSH PUPPiE®. SLUSH PUPPiE® is a registered trademark of The ICEE Company, a Subsidiary of J&J Snack Foods Corp.