Advertisement
http:/;www.manualscenter.com
REAR PANEL FACILITIES
FRONT SPEAKERS terminals
A: Connect to the first set of speakers.
B: Connect to a second set of speakers.
Speaker impedance:
Refer to @) SPEAKER IMPEDANCE SELECTOR switch.
NOTE:
Do not allow any of the code's conductors to protrude from the
terminals or touch any other conductors. Malfunctioning or breakdown
may occur when conductors come into contact with each other.
@) SPEAKER IMPEDANCE SELECTOR switch
Set this switch to match the impedance of your front speakers.
[1] When using one pair of speakers:
8 Q to less than 16 Q
HIGH
4
to less than 8 0
LOW
(ii When using two pairs of speakers:
Select LOW as the selector switch position and use speakers with a
nominal impedance of between 8 and 16 ©.
NOTE:
Turn off the receiver's power before changing the impedance selector
Switch setting.
AC OUTLETS
SWITCHED TOTAL 200 W (1.6 A) MAX
Power supplied through these outlets is turned on and off by the
receiver's
POWER
switch. Total electrical power consumption
of
connected equipment should not exceed 200 W (1.6 A).
UNSWITCHED 200 W (1.6 A) MAX
Power flows continually to this outlet, regardless of whether the receiver
is switched ON or OFF. Electrical power consumption of the connected
equipment should not exceed 200 W (1.6 A).
NOTE:
Do not connect appliances with high power consumption such as
heaters, irons, or television sets to these AC OUTLETS in order to avoid
overheating and fire risk.
This can cause the receiver to malfunction.
CAUTION:
DO NOT CONNECT MONITOR OR TV SET.
@ AC Power cord
Connect to AC wall socket.
NOTE:
This unit should be disconnected by removing. the power plug from the
wall socket when not in regular use, e.g. when on vacation.
120
Advertisement
