Advertisement
REAR PANEL FACILITIES
@) CENTER AMP jacks
(POWER IN]
When a separate preamplifier is used for surround center speaker and
this unit is used as a power amplifier, connect the preamplifier to this
jack.
(PRE-OUT]
When a separate power amplifier is used to drive the surround center
speaker, connect the power amplifier to this jack.
REAR AMP jacks
[PRE OUT]
When a separate power amplifier is used to drive the rear speakers,
connect the power amplifier to these jacks.
[POWER IN]
When a separate preamplifier is used for rear speakers and this unit is
used as a power amplifier, connect the preamplifier to these jacks.
(1) CENTER SPEAKERS terminals
Connecting the surround center channel speaker system.
Speaker impedance:
Use a center speaker with a nominal impedance of 8 Q.
NOTE:
Do not allow any of the code's conductors to protrude from the
terminals or touch any other conductors. Matfunctioning or breakdown
may occur when conductors come into contact with each other.
@2) REAR SPEAKERS terminals
Connect the rear speakers to these terminals.
Speaker impedance
Connect speaker systems with a nominal impedance of between 8 and
169.
NOTE:
Do not allow any of the cord's conductors to protrude from the terminals
or touch any other conductors. Malfunctioning or breakdowns may
occur when conductors come into contact with each other.
3 MULTI-ROOM SPEAKERS terminals
Connect to the Multi-room speakers.
Speaker impedance
Connect speaker systems with a nominal impedance of between 8 and
160.
NOTE:
Do not allow any of the cord's conductors to protrude from the terminals
or touch any other conductors. Malfunctioning or breakdowns may
occur when conductors come into contact with each other.
@) PHONO LEVEL control
Use to adjust turntable input level. If distortion occurs when you are
using a high-output cartridge, adjust the volume level until it's the same
as another input, such as TUNER.
(5) GND terminal
Connect the turntable ground lead to this terminal.
Audio INPUT jacks
PHONO........... Connect to turntable.
CD. cinieasatetacwe Connect to compact disc player.
LINE ww...
Connect to the audio output jacks of an additional
audio component.
@) LD jacks (input)
{VIDEO IN]
When watching the video image from an LD player or a VCR used for
playback, connect its VIDEO OUTPUT jack here.
[AUDIO IN (L, R)]
When playing back the audio channel from an LD player (CD CDV LD
player) or a VCR for playback, connect its AUDIO
OUTPUT jacks here.
TV jacks (input)
Use these jacks if you wish to connect a TV tuner with both video and
audio outputs.
[VIDEO IN}
Connect the TV tuner's VIDEO OUTPUT to this jack.
[AUDIO IN (L, R)]
Connect the TV tuner's AUDIO OUTPUT to these jacks.
VIDEO jacks (input)
Connect the output jacks of video components.
For example, connect a playback-only VCR or a video camera.
@0) VIDEO OUT TO MONITOR TV jacks (output)
Use to connect a TV monitor or a TV set with video input terminals for
watching program materials from a VCR or Video disc player 'LD player)
connected to this unit.
@i) FRONT AMP jacks
[PRE-OUT]
When a separate power amplifier is used to drive the front speakers,
connect the power amplifier to these jacks.
[POWER IN]
When a separate preamplifier is connected and this unit is used as power
amplifier, connect the preamplifier to these jacks.
@) MULTI-ROOM
& SOURCE REMOTE IN jack
When using the MULTI-ROOM
& SOURCE function, conrect to the
separately sold MR-100 Muiti-Room remote control unit.
@3) CONTROL IN, OUT jacks
Used for system control with other Pioneer components bearing the
Ril mark.
IN:
For connection
from the CONTROL
OUT jack od another
component (TV, etc.).
OUT:
For connection to the CONTROL IN jack of another component.
NOTE:
The receiver's remote sensor does not function when a plugis inserted
in the IN jack. To operate, point the remote control unit at he remote
sensor an the component to which the receiver's IN jack is ormnected.
When using
the MR-100
MR-100
|
anes
@eL
4
Receiver
f-\
Pioneer component
bearing the
mark.
To te CONTROL IN
jackof the Pioneer
component bearing
the Sal mark,
Remote
control unit
119
Advertisement
