Victorian Plumbing Arezzo AZST3 Installation Instruction

We recommend this product is installed by a fully qualified
tradesperson.
Tools Required (not supplied)
Pencil; Tape measure; Screwdriver appropriate to fixings;
Spirit level; Drill; Masonry drill bit appropriate to fixings,
Ceramic drill bit (optional) appropriate to fixings.
Home Safety Advice
• It is recommended that two people fit this product to
ensure that it is fitted safely.
• Always take care when using power tools, particularly in
the bathroom.
• Always check for hidden cables and pipework before
drilling and take extreme care if there is any water in the
working area.
• It is advisable to use a residual current circuit breaker
(RCCB).
• Always wear suitable eye protection when drilling.
• If the product is to be fitted on a ceramic tiled wall, a
ceramic drill bit should be used.
• Always ensure that the drill hole passes through the
central tiled area rather than through the grouted area.
To prevent damage to the tile, mask the area around the
hole with tape before drilling.
• Do not strike the product with hard or sharp objects.
• Warning! This product has been designed as a seat only
and should not be used for any other purposes.
Maximum Weight – 160 kg evenly distributed about the
seat.
Product Location
Shower seats are only as strong as the wall to which they are
fixed and the fixings that are used. For different wall types you
will need to ensure that you are using the correct type of fixing for
the material of the wall. The addition of backboards on the
outside of the wall or appropriate strengthening of internal
structures may be required to provide adequate wall strength.
Product Care
To retain the best quality finish, clean product regularly with a
soft damp cloth. Do not use abrasive or chemical cleaners as
these will damage the product. Dry the shower seat after use.
Note: If the wall is made of lightweight thermal blocks, aerated
hollow brickwork, or prefabricated partitions, even the most
appropriate fixings may not be able to withstand the loads which
can be suddenly applied to shower seats.
Recycling and disposal
Please recycle the packaging in accordance with your local
government regulations on waste handling and follow the same
advice at the end of the products' life.
For more Information
Visit: victorianplumbing.co.uk