Table of Contents
Advertisement
(Sample Illustration) Positioning the disc in a tray-type drive
❖ Slot-type drive: With the label facing up, carefully place
(Sample Illustration) Positioning the disc in a slot-type drive
Removing an optical disc
To remove an optical disc with the computer turned on:
1
Press the eject button on the drive.
If you insert the disc incorrectly, it may jam the drive. If this happens,
contact Toshiba support for assistance.
the disc partially into the slot until the disc stops or the
drive starts pulling the disc in.
Use only standard (12 cm) CD, DVD, or Blu-ray™ Discs. Any other
size or shape disc cannot be removed from this slot and may damage
the system.
If your optical disc drive has a manual eject button, you can remove a
disc while the computer is off if necessary (for example, if you
cannot turn on the computer because the battery is completely
discharged). See "Using the manual eject button" on page 24.
Otherwise, the computer must be powered on to eject a disc (follow
the procedure below).
Using the optical disc drive
23
Advertisement
Table of Contents
