Table of Contents
Advertisement
Section 4 - Configuration
This page allows you to set up access to files on an external USB device
plugged into the router. Then you can perform file sharing through local
network. To access this page, go to Settings > USB.
DLNA Settings
DLNA:
Enable or disable the DLNA media server functions, allowing
connected DLNA clients access to media files over the network.
Samba Setup
Samba:
Enable or disable file sharing using Samba. Computers and devices
that support SMB/CIFS protocol will be able to access the files on the
USB device connected to this router.
Work Group:
Enter the Windows workgroup name.
Net BIOS Name:
Enter the name for this device as you wish it to appear on your
network.
Username:
Enter a username for authentication for access.
Password:
Enter a password for authentication for access.
Click Save when you are done.
For information on how to access your USB drive from a Windows-based PC
refer to Connect and Share a USB Storage Device on page 93.
D-Link DSL-X3052E User Manual
USB
58
Advertisement
Table of Contents
