D-Link DSL-X3052E User Manual page 112

Section 7 - Troubleshooting
• Access the web configuration. Open your web browser and enter the IP address of your D-Link router in the address bar.
This should open the login page for your web configuration.
• If you still cannot access the configuration, unplug the power to the router for 10 seconds and plug back in. Wait about 30
seconds and try accessing the configuration. If you have multiple computers, try connecting using a different computer.
2. What can I do if I forgot my password?
If you forgot your password, you must reset your router. This process will change all your settings back to the factory defaults.
To reset the router, locate the reset button (hole) on the rear panel of the unit. With the router powered on, use a paperclip
to hold the button down for 5 seconds. Release the button and the router will go through its reboot process. Wait about 30
seconds to access the router. The default IP address is 192.168.1.1. When logging in, enter the admin password shown on
device label attached to the bottom of the device.
D-Link DSL-X3052E User Manual 108