Table of Contents
Advertisement
USING THE PROJECTOR
Wireless Media Streaming
Select TapCast to project your mobile device display to the projector through Wi-Fi connection. Then press Enter
on the remote control or
1.
When using TapCast function for the first time, download and install the TapCast application into your
mobile device.
Notee:
You can scan the QR code shown on the screen.
2.
On the projector, insert the Wi-Fi dongle and go to Settings > Network > Wireless Setting (Wi-Fi
Display). Then set the Wi-Fi setting to ON.
3.
Connect the projector to an available network. For details, please refer to page 51.
4.
On your mobile device, enable the Wi-Fi function. Then connect to the same network as the projector.
IMPORTANTT!
‡
The projector and your mobile device must be connected to the same Wi-Fi network.
‡
During the Wi-Fi Display operation, make sure that you have access to the internet.
48
English
on the projector keypad to enter the TapCast screen.
Advertisement
Table of Contents
