Table of Contents
Advertisement
USING THE PROJECTOR
Brightness
Adjust the brightness of the image.
Contrast
The contrast controls the degree of difference between the lightest and darkest parts of the picture.
Sharpness
Adjust the sharpness of the image.
Color
Adjust a video image from black and white to fully saturated color.
Tint
Adjust the color balance of red and green.
Gamma
Set up gamma curve type. After the initial setup and fine tuning is completed, utilize the Gamma Adjustment steps
to optimize your image output.
‡
Film: For home theater.
‡
Video: For video or TV source.
‡
Graphics: For PC / Photo source.
Standard(2.2): For standardized setting.
‡
1.8 / 2.0 / 2.4: For specific PC / Photo source.
‡
Notee:
These options are only available if the 3D mode function is disabled. In 3D mode, user can only select 3D
for Gamma setting.
Color Settings
Configure the color settings.
BrilliantColor
‡
enable higher brightness while providing true, more vibrant colors in picture.
‡
Color Temperature: Select a color temperature from D55, D65, D75, D83, D93, or Native.
Color Gamut: Select an appropriate color gamut from Native, HDTV, Presentation, Cinema, or Game.
‡
‡
Color Space (non-HDMI input only): Select an appropriate color matrix type from the following:
AUTO, RGB, or YUV.
‡
Color Space (HDMI input only): select an appropriate color matrix type from the following: Auto,
RGB(0-255), RGB(16-235), and YUV.
‡
Color Matching: Adjust hue, saturation, and gain for the red, green, blue, cyan, yellow, magenta, or
white color.
‡
RGB Gain/Biase: This settings allows to configure the brightness (gain) and contrast (bias) of an
image.
Signal
Adjust the signal options.
‡
Frequency: Change the display data frequency to match the frequency of your computer's graphic
card. Use this function only if the image appears to flicker vertically.
Phase: Synchronize the signal timing of the display with the graphic card. If the image appears to be
‡
unstable or flickers, use this function to correct it.
‡
H. Position: Adjust the horizontal positioning of the image.
V. Position: Adjust the vertical positioning of the image.
‡
: This adjustable item utilizes a new color-processing algorithm and enhancements to
TM
31
English
Advertisement
Table of Contents
