Dry/Moist Heat Therapy; Standard/Plus/Deluxe Auto Shut-Off - Kaz SoftHeat Manual

Dunlap_SoftHeat_OM.qx 5/24/06
3A
Dry Heat Therapy
1. Insert the pad into the cloth cover. (see Figure 1)
2. Plug the power cord into a 120 volt AC electrical outlet.
3. For Standard and Plus/Deluxe models, set controller to
desired setting. For Deluxe with Therapy Timer model,
press the flashing power button first, then set controller
to desired setting. (See figure 2)
4. Place the pad on the area to be treated – See Figures 3A-D
for examples of how to position heating pad.
5. Turn pad off and unplug power cord when finished.
Moist Heat Therapy
1. Insert the pad into the cloth cover. (see Figure 1, do not insert Aquifer™ sponge yet)
2. Saturate the Aquifer™ sponge with warm water and wring out the excess.
3. Place the sponge on the heating pad inside the cloth cover.
4. Plug the power cord into a 120 volt AC electrical outlet.
5. For Standard and Plus/Deluxe models, set controller to desired setting. For Deluxe with
Therapy Timer model, press the flashing power button first, then set controller to desired
setting. (See figure 2)
6. Place the pad on the area to be treated with the Aquifer™ sponge side against your body.
See Figure 3A-D for examples of how to position heating pad.
7. Turn pad off and unplug power cord when finished.
Standard and Plus/Deluxe Auto Shut-off
Check figure 2 to determine which controller you have. For the Standard and Plus/Deluxe
models, your heating pad is equipped with a special safety feature designed to shut the heating
pad off after 60 minutes of use. When the automatic shut-off feature turns the pad off, a light
on the controller flashes slowly to let you know the pad has shut off. To restart the pad, set the
controller to off and reselect the desired heat setting.
Deluxe with Therapy Timer
Check figure 2 to determine which controller you have. For Deluxe with Therapy Timer model,
your heating pad is equipped with a selectable auto shut-off. Your pad is designed to
automatically shut-off after 30 to 120 minutes - the time depends on which of the 4 auto shut-
off timer choices you select. When the auto shut-off feature turns off the pad, the power button
will flash. To restart the pad, simply press the power button and reselect the desired heat
setting.
7:20 PM Page 5
3B 3C
3D