Advertisement
— ■ PANEL DESCRIPTION
O AC Adaptor Jack
This jack accepts connection of the AC Adaptor
(BOSS PSA-120,220 or 240; optional).
* Use of the AC adaptor allows you to play for
as long as you wish without being concerned
about the battery wearing out.
* Make certain you use only the specified AC
adaptor (PSA series). Use of any other AC
adaptor
can
cause
operational errors or
damage to the unit.
0 Check Indicator
Lights up when the effect is on, allowing you to
confirm whether the effect is on or off.
* This indicator also serves as the Battery Check
indicator. When it becomes dim, or no longer
lights, this means that the battery has been
depleted and needs to be replaced with a new
one.
0 Mix Knob
Provides for adjustment of the mixing level for the
signal to which the enhancement effect has been
applied.
[ fV) : Provides a natural enhancement, with the
signal to which the enhancement effect
has been applied being mixed according
to the positive phase.
[(!)] : The mixing level is set at zero, and no
enhancement is obtained.
[Z1 ] : Provides a characteristically different en¬
hancement, with the signal to which the
enhancement
effect
has
been applied
being mixed according to the negative
phase.
O Frequency Knob
Provides for selection of the frequency band that
the enhancer will take effect upon.
[CV] : The frequency band that the enhancer will
take effect upon is raised.
(Y)] : The frequency band that the enhancer will
take effect upon is lowered.
* As perceived by the ear, the enhancer effect
will often seem much more prominent when
the frequency band is set in the lower ranges.
0 Output Jack
This jack is used for making the connection with
an amplifier or other effects devices.
0 Pedal Switch
Used to turn the effect on or off.
o Thumb Screw
When this screw is loosened, the pedal opens,
allowing for the battery to be changed. For
information on how to change the battery, refer
to "BATTERY REPLACEMENT".
* The screw should not be removed completely
from the pedal. If it should come off, make
sure you do not misplace it.
0 Sens Indicator
During use of the effect, this indicator lights
when
the
enhancer
effect is actually being
applied. Even when the effect is being used, if
this indicator is out, the sound is being output as
normal sound.
0 Sens Knob
Used to adjust the sensitivity with respect to the
input signal.
[Q] ; The
sensitivity
is
increased.
The
enhancement effect is obtained even with
low levels of input.
[O] : The sensitivity is decreased.
Only the
higher
levels
of
input
will have the
enhancer effect applied.
0 Input Jack
This jack accepts connection of a guitar, or other
electronic instruments and devices.
* The Input jack is equipped with a power
switch. When a plug is inserted into it, the
power is turned on; and when the plug is
pulled out, the power is turned off. When the
unit is not being used, any cord connected to
the Input jack should be disconnected.
CONNECTIONS
__AC Adaptor
Connect to the AC adaptor jackfeT B("^S
* When a plug is inserted into the Input jack,
the power is turned on.
Advertisement
