Using Counter/Remain; Using Counter Memory Function - Sony Trinitron KV-13VM20 Operating Instructions Manual

Using COUNTER/REMAIN
To display the counter, press COUNTER /REMAIN
once.
The tape counter shows the tape travel time in
hours, minutes and seconds during recording or
playback.
Tg_see the remaining tape time during recording or | Note |
playback,
press COUNTER/REMAIN twice. ; eat ; .
oe ; tee , For seeing the remaining tape time, first
The remaining tape time appears with "REM. check the tape mode.
lf you want to see the remaining tape time in
T-120, press RETURN then A+ or V- until
T-120 appears in TAPE REMAIN screen.
For OTHERS, press the button until
OTHERS appears.
Using Counter Memory Function
The counter memory makes it easy to return to a particular spot on the tape after
recording or playback. The tape stops when the counter reaches SP 0:00:00. This
feature is especially helpful when editing a recording.
1 Press COUNTER/REMAIN to see the counter.
- "
2 Start recording or playback, and press
COUNTER RESET at the point you want to
return to.
The counter displays SP 0:00:00.
3 Press STOP # when you finish recording or playing the tape. =
Press REWIND/REVIEW <<.
The tape stops at SP 0:00:00.
5 Press PLAY p to play the tape.
Chapter 4 : Using Basic VCR Features 35