Table of Contents
Advertisement
Available languages
Available languages
Connecting Other Equipment
Zw
: Signal flow
to AUDIO
to video output
to audio output
to VHF/UHF
aay
VHF/UHF ouput
1
Remove
the antenna
cable from the VIDEO
TV
| Notes |
Antenna terminal. Connect the antenna cable to the
* Repeatedly press INPUT SELECT on the VIDEO TV or on the
antenna terminal of the other Video/Audio source (ex.
Remote Commander so that "LINE" appears on the screen.
Video recorder). Then connect a coaxial cable from
* To return to TV mode, repeatedly press INPUT SELECT on the
the VHF output terminal back to the antenna terminal
VIDEO TV or on the Remote Commander so that a channel
of the VIDEO TV.
number appears on the screen.
* For operating instructions, refer to the instruction manual
furnished with the VCR.
* If the picture or sound is affected, move the VCR away from the
VIDEO TV.
2
To use your
VIDEO TV to monitor an audio/video
source (such as another VCR, a camcorder or a laser
disc player), connect the audio/video source output
jacks to the AUDIO/VIDEO IN jacks on the
VIDEO
TV.
Then select LINE IN using the input select on the
:
VIDEO TV or Remote commander.
1 8
Chapter 1 : Setting Up
Advertisement
Table of Contents
