Safety Precautions - Kenwood KVC-475 Instruction Manual

Introduction
pate your needs and cesires.
to meet your special requirements.
For your records
Model KVC-475 Serial number
Unpacking
We recommend that you retain the original carton and pack-
ing materials for use should you transport or ship the unit in
the future.
Important!
U.S.A. and Canada
Units shipped to the U.S.A. and Canada are designed
for operation on 120 volts AC only.
These units are not equipped with an AC voltage se-
lector switch and the discussion of such a switch that
follows should be disregarded.
All other countries
Units shipped to countries other than the U.S.A. and
Canada are equipped with an AC voltage selector
switch on the bottom plate.
Refer to the following paragraph for the proper setting
of this switch.
Safety precautions
AC voltage selection
This unit operates on 120 volts or 220 volts AC. The AC
voltage selector switch on the bottom plate is set to the vol-
tage that prevails in the area to which the unit is shipped.
Before connecting the power cord to your AC outlet, make
sure that the setting position of this switch matches your
line voltage. If not, it must be set to your voltage in accor-
dance with the following direction.
Note:
Our warranty does not cover damage caused by excessive line vol-
tage due to improper setting of the AC voltage selector switch.
AC 120V~ <> AC 220V~ AC 120V~ <P AC 220V~
This shows switch
lever is locked in
220V~positions
This shows switch
lever is locked in
120V ~positions.
Move switch lever to match your line
voltage with a small screw driver or
other pointed tool.
AC voltage selector switch
WARNING:
TO PREVENT FIRE OR ELECTRIC SHOCK, DO
NOT EXPOSE THIS APPLIANCE TO RAIN OR
MOISTURE.
The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to
alert the user to the presence of uninsulated "dangerous voltage" within the product's
enclosure; that may be of sufficient magnitude to constitute a risk of electric shock to
persons.
2 KVvc475(U)