Jaw * 3 Jaw * 3 Component * 3 Please contact us if you encounter any problem with your LX1 & LX1 Max and we will get back to you as soon as possible. Email:support@laserpecker.com Rotary Head*1 Online User Community LaserPecker’s...
Page 4
Component Overview & Descriptions Lever Lock Button LED Indicator Materiat Grip USB-A Power Output/Input Angle Adjustment Knob...
Page 5
Component Overview & Descriptions Connect the Rotary Extension Connect to LX1 & LX1 Max...
Quick Installation Assemble the Riser Add-on (sold separately) Tighten the screws to connect the heightening feet to the LX1 & LX1 Max support feet...
Page 7
Assemble the Rotary Headstock Attach Rotary Head to Base Plate with 4 pcs of M3x10 screws and the Hex Key.
Page 8
Headstock Assembly ①Double-step Jaws Installation Attach three double-step jaws to the rotary chuck using the wrench and 6 pcs of M3x6 screws. Tightening screws...
Page 9
②Single-step Jaws Installation Attach three single-step jaws to the rotary chuck using the wrench and 6 pcs of M3x6 screws. Tightening screws...
Page 10
③ Stud Component Installation Attach three stud components to the rotary chuck. Tightening screws...
Page 11
Rotary Extension Assembly Turn the Lever Slide the Tailstock onto the track along the base of the Rotary Head...
Page 12
Quick Start Guide Turn on Mode Settings>Rotary Extension on the app, and the LX1 & LX1 Max laser module will automatically move to the specified position. According to the position of the laser head, adjust the position of the rotary extension, and perform manual focus at the same time. Open the preview to align the objects that need to be sculpted.
Page 13
When the object is too large, press down the When the object is fixed, press up the Lock Lock Button and turn the gear on the chuck Button so the chuck will rotate as it should till the jaws can hold the object. when previewing and engraving/cutting.
Page 16
Shenzhen Hingin Technology Co., Ltd We support global online technical support services for this product. If you have any problems during your use, please contact us. Email: support@laserpecker.com...