Table of Contents
Advertisement
Display Screen
APPLIANCE STATUS
THERMOSTAT
FLAME HEIGHT
Figure 8. RC300 Display Screen
TIMER DISPLAY/FUNCTION
Function Buttons
Use POWER button to turn the unit on and off.
Menu
Use MENU button to display the menu functions.
Menu
Only functions that can
V
Select
displayed. For example: Flame Height will not
V
Select
be displayed when the remote status is OFF.
Menu
Use the SELECT button to select the current
V
Select
feature.
Use the UP and DOWN arrows to toggle
through the menu functions and value selec-
V
V
tions in the submenus.
THERMOSTAT DESIRED
TEMP SETTING
CHILD LOCK
INDICATOR
TRANSMISSION
INDICATOR
LOW BATTERY
INDICATOR
ROOM TEMP
DISPLAY
be activated will be
Monessen • Mojo Installation/Owner's Manual • 4623-900 Rev. F • 01/23
Idle When Remote is in ON Mode
The remote control will go into an idle mode if no but-
tons are pressed within 5 seconds. Press any button to
resume full functionality. In idle mode, only active func-
tions will show on the screen.
Figure 9. RC300 Idle Mode
Standby mode
The remote control will go into a standby mode if no but-
tons are pressed within 5 minutes. Press the POWER
button to reactivate the remote control to ON mode. Ac-
tive functions will be displayed
Figure 10. RC300 Standby Mode
35
Advertisement
Table of Contents
