IBM 9332 Installing page 21

11
Install the front portion
of the left rail.
Notes:
1. Because of the rack
padding, more pressure
is needed
t<l'
do this
step than for the right
side. ·
2.
When you move the
rail, the rear pins may
slide out;
• Holding the rail in
place, move the
front portion of the
railto center the
marked hole
between the pins.
Then, move the
front pins behind the
frame holes.
• Force the rail
toward the front so
that all pins are in.
the holes.
RD1 C074-0
1-13