Axis M4216-V User Manual page 50

AXIS M4216-V Dome Camera
The web interface
• Create: Click to save.
Picture-in-picture
Two streams are displayed on the external monitor at the same time. One stream fills the display and the other is a smaller
picture. Position, picture size and borders are customizable.
• Picture-in-picture
-
-
-
-
-
-
-
-
-
-
-
-
• Main view
-
-
-
Edge-to-edge
Pairing
Pairing allows you to use a compatible Axis network speaker or microphone as if it's part of the camera. Once paired, the network
speaker acts as an audio out device where you can play audio clips and transmit sound through the camera. The network microphone
will take up sounds from the surrounding area and make it available as an audio input device, usable in media streams and recordings.
Important
For this feature to work with a video management software (VMS), you must first pair the camera with the speaker or
microphone, then add the camera to your VMS.
Set a 'Wait between actions (hh:mm:ss)' limit in the event rule when you use a network paired audio device in an event
rule with 'Audio detection' as condition and 'Play audio clip' as action. This will help you avoid a looping detection if the
capturing microphone picks up audio from the speaker.
Address: Enter host name or IP address to the network speaker.
Username: Enter username.
Password: Enter password for the user.
Speaker pairing: Select to pair a network speaker.
Microphone pairing
Clear fields: Click to clear all fields.
Connect: Click to establish connection to the speaker or microphone.
Source: Select the camera that will stream as the smaller picture.
Rotate image 180°: Click to rotate the image.
Mirror image: Click to flip the image.
Position: Select where on the screen the picture should appear.
Picture size: Drag the slider to set the size (% of screen) of the picture.
Border: Click to toggle borders for the picture on or off.
: Drag the slider to set the thickness for the entire border.
: Drag the slider to set the thickness for the top border.
: Drag the slider to set the thickness for the right border.
: Drag the slider to set the thickness for the bottom border.
: Drag the slider to set the thickness for the left border.
Border color: Select a border color.
Source: Select the camera that will stream on the full display.
Rotate image 180°: Click to rotate the image.
Mirror image: Click to flip the image.
: Select to pair a microphone.
50