Axis M4216-LV User Manual page 19

AXIS M4216-LV Dome Camera
The web interface
Installation
Capture mode
the capture mode, it can affect many other settings, such as view areas and privacy masks.
Mounting position
Power line frequency: To minimize image flicker, select the frequency your region uses. The American regions usually use 60 Hz.
The rest of the world mostly uses 50 Hz. If you're not sure of your region's power line frequency, check with the local authorities.
Rotate: Select the preferred image orientation.
Zoom: Use the slider to adjust the zoom level.
Focus: Use the slider to manually set the focus.
AF: Click to make the camera focus on the selected area. If you don't select an autofocus area, the camera focuses on the
entire scene.
Autofocus area: Click
Reset focus: Click to make the focus return to its original position.
Note
In cold environments, it can take several minutes for the zoom and focus to become available.
Image
Appearance
Scene profile
including color level, brightness, sharpness, contrast, and local contrast, for a specific environment or purpose.
• Forensic: Suitable for surveillance purposes.
• Indoor
• Outdoor
• Vivid: Useful for demonstration purposes.
• Traffic overview: Suitable for vehicle traffic monitoring.
Saturation: Use the slider to adjust the color intensity. You can, for example, get a grayscale image.
Contrast: Use the slider to adjust the difference between light and dark.
: A capture mode is a preset configuration that defines how the camera captures images. When you change
: The orientation of the image can change depending on how you mount the camera.
to show the autofocus area. This area should include the area of interest.
: Select a scene profile that suits your surveillance scenario. A scene profile optimizes image settings,
: Suitable for indoor environments.
: Suitable for outdoor environments.
19