Performing Initial Start-Up; General Information; Basic Operation; Switching The Appliance On Or Off - Siemens EQ.700 integral TQ703R07 Information For Use

en operation
6.4 Performing initial start-up
After connecting the appliance to the
power supply, configure the settings
for initial start-up. Initial start-up only
appears when switching on for the
first time.
Press to switch the appliance
1.
on.
Follow the instructions on the dis-
2.
play.
The display will guide you through
a
the programme.
Notes
If you want to set up Home Con-
¡
nect now, follow the instructions in
the Home Connect app.
→ "Setting up Home Connect",
Page 21
If "Demo mode" is selected, only
¡
the displays will work. You cannot
dispense a beverage or run a pro-
gramme.
6.5 General information
Please bear this information in mind
so that you can get the best out of
your appliance.
Notes
The appliance has been pro-
¡
grammed at the factory with stand-
ard settings for optimum operation.
The grinder has been factory-set
¡
for optimum operation. If coffee is
only dispensed drop by drop or is
too thin and with too little crema,
you can adjust the grinding level
when the grinder is running.
→ "Adjusting the grinding level",
Page 18
During operation water droplets
¡
may form at the ventilation slits
and on the lid of the tablet com-
partment.
16
If you do not perform any actions
¡
on the appliance for a certain
period, it will switch off automatic-
ally. You can change the duration
in the basic settings.
For technical reasons steam can
¡
escape from the appliance.
The first beverage will not yet have
¡
its full aroma if:
– You are using the appliance for
the first time.
– You have run a service pro-
gramme.
– You have not used the appli-
ance for a long time.
Do not drink the beverage.
Tip: You will get a stable, fine-pored
crema after you have started up your
appliance and dispensed a few cups.
7 Basic operation
ope r a t i o n
ope r a t i o n
7.1 Switching the appliance
on or off
Press ⁠ .
▶
When the appliance switches on,
the display shows the logo. When
the appliance is switched on or off,
it will rinse itself automatically.
When switched off, the appliance
will emit steam into the drip tray for
cleaning. The appliance will not
rinse itself if the appliance is still