HALO Install and Placement Guide HALO-2C Installation BEFORE YOU START Tools required include: #2 Phillips screwdriver, T10 Torx wrench (included), and means to make the mounting hole (120 mm hole saw, 5” hole saw, or hand saw for sheetrock). The HALO unit requires a wired network connection (Ethernet) which includes standard 802.3af PoE power.
Page 4
HALO Install and Placement Guide HALO-2C Installation Cutout...
HALO Install and Placement Guide HALO-3C Installation BEFORE YOU START Tools required include: #2 Phillips screwdriver, T10 Security Torx wrench (included), sheetrock anchors with accompanying screws, and means to make the mounting hole (19mm spade bit or hole saw, ¾” spade bit or hole saw, or hand saw for sheetrock).
HALO Install and Placement Guide HALO Ceiling Placement HALO can typically cover 144 square feet (13.4 square meters) with normal ceiling heights (8ft/2.4m) for vape sensors however other sensors work effectively up to 1963 square feet (182.4 square meters). Its coverage area will also vary by the ventilation in the room, the ceiling height will also be a contributing factor.
HALO Install and Placement Guide HALO-3C-PC People Counting Placement Installation Ensure that the HALO ceiling mount is properly aligned. Install that the top of the B Axis is perpendicular to the wall with the primary entry. Please refer to the guide below. If possible, make use of a laser level to assist. Wall with the primary entry.
HALO Install and Placement Guide HALO-3C Wall Placement HALO should be in an area relatively free of air currents and 8-to-9-foot height from floor. Avoid HVAC exhaust or return ducts, fans, operable windows and areas near the door between two rooms.
HALO Install and Placement Guide HALO-3C Wall Installation Installation Ensure that the HALO mount is properly aligned. Install that the top of the B Axis is toward the ceiling. Please refer to the guide below. If possible, make use of a level to assist. Ceiling Ceiling Security lock at bottom with B holes...
Need help?
Do you have a question about the HALO-2C and is the answer not in the manual?
Questions and answers