Cleaning The Engine-Cooling Fins And Shrouds; Checking And Cleaning The Hydraulic-Unit Shrouds - Toro 75930 Operator's Manual

Cleaning the
Engine-Cooling Fins and
Shrouds
Service Interval: Every 100 hours/Yearly (whichever
comes first)
1. Disengage the blade-control switch (PTO) and
engage the parking brake.
2. Shut off the engine, remove the key, and wait
for all moving parts to stop before leaving the
operating position.
3. Remove the air-intake screen, the recoil starter,
and the fan housing
4. Clean the debris and grass from the engine
parts.
5. Install the air-intake screen, the recoil starter,
and the fan housing
Figure 76
1. Engine guard
2. Engine air-intake screen
3. Bolt
(Figure 76).
(Figure 76).
4. Fan housing
5. Screw
Checking and Cleaning the
Hydraulic-Unit Shrouds
Service Interval: Before each use or daily
1. Disengage the blade-control switch (PTO) and
engage the parking brake.
2. Shut off the engine, remove the key, and wait
for all moving parts to stop before leaving the
operating position.
3. Move the seat forward.
4. Clean the debris and grass from the
hydraulic-unit shrouds
5. Position the seat.
1. Hydraulic-unit shrouds
g004218
54
(Figure 77).
Figure 77
g029645
g009920