Toro 75930 Operator's Manual page 39

Figure 46
1. Air-inlet cover
2. Air-inlet screen
6. Release the latches on the air cleaner and pull
the air-cleaner cover off the air-cleaner body
(Figure 47).
7. Clean the inside of the air-cleaner cover with
compressed air.
8. Gently slide the primary filter out of the
air-cleaner body (Figure
Note:
Avoid knocking the filter into the side of
the body.
9. Remove the inner filter only if you intend to
replace it.
Important:
Never attempt to clean the inner
filter. If the safety filter is dirty, then the
primary filter is damaged. Replace both
filters.
g012996
3. Air-cleaner body
4. Latch
47).
1. Inner filter
2. Primary filter
3. Air-cleaner cover
10. Inspect the primary filter for damage by looking
into the filter, while shining a bright light on the
outside of the filter.
Note:
Holes in the filter will appear as bright
spots. If the filter is damaged, discard it.
Servicing the Primary Filter
•
If the primary filter is dirty, bent, or damaged,
replace it.
•
Do not clean the primary filter.
Servicing the Safety Filter
Replace the safety filter, never clean it.
Important:
Do not attempt to clean the safety
filter. If the safety filter is dirty, then the primary
filter is damaged. Replace both filters.
39
Figure 47
4. Latch
5. Air-cleaner body
g012997