en Disposal
17.2 Information on display panel
Fault
Message showing "D"
or "E" appears in the
display.
Disposal
18 Disposal
18.1 Disposing of old appliance
Valuable raw materials can be reused by recycling.
Unplug the appliance from the mains.
1.
Cut through the power cord.
2.
Dispose of the appliance in an environmentally
3.
friendly manner.
Information about current disposal methods are
available from your specialist dealer or local author-
ity.
20
Cause and troubleshooting
Malfunction
Reset appliance.
1.
Either press and hold
‒
Or switch off the circuit breaker or fuse in the electrical panel. Switch the fuse back
‒
on after approx. 10 seconds.
a If the fault was a one-off, the message will disappear.
If the message appears again, call the after-sales service. Please specify the exact error
2.
message when calling.
→ "Customer Service", Page 21
for at least 6 seconds.