Caution Before Installation - Smeg CB30PFNF User Manual

21

1. Caution Before Installation

■ Product must be installed at a place to avoid heat of the heater or boiler, or direct
light ray, or where airflow is smooth or where appropriate ventilation is always
provided.
■ Prepare the furniture case that air circulation is possible be referring the dimension
of furniture. Install the product so that airflow through the front air suction inlet is
smooth. Normal performance of product may be disturbed when an air circulation
structure is not obtained.
■ Install the product at the place where there is no entrance/exit of the outside object
(mouse) since fire may occur due to damage of power cords.
■ Install the furniture door attached to the refrigerator so that approximately 5mm
interval can be maintained between the side furniture door and the wall.
■ Use the specified dimension of furniture case since the furniture door is sagged
during use or it is inconvenient to use where the furniture is excessively lengthened
for accommodation space on the product.
■ Check there is no lay of the product door after attaching the furniture door.
Check the gasket of the fridge/the freezer is properly attached.
■ Use the furniture case with hard material since bolting force is weak and it is
damaged where the furniture case is of soft material (example, gypsum).
■ Use the furniture case without twisting by radiation of product, or bending
phenomena due to moisture occurred by opening or closing of the refrigerator door.
■ Install the product at a place where horizontality and verticality of the furniture case
are accurate (within 1mm horizontally or vertically). Verticality of the side panel
may be distorted or the furniture case may be slowly twisted for a long time in case
of installing the product on the bottom plate with a soft material (Ensure that the
product has material or structure that distortion does not occur continuingly).
■ Install the built-in refrigerator in cooperation of 2 persons (1 team).
■ Protect children during installation, in use of installation parts and from installation
location.
■ Take and use screws from the packing vinyl one by one since you may be injured
due to leaving of screws during work.
■ Prohibit use a multi-cord since there is danger of fire.
■ Ensure to find normal operation of the product by connection of power cord before
installation.
Caution