Sony TRINITRON KV-32S12 Service Manual page 8

2 Press + #0r-¢ to move the cursor (>) ta
SET UP and press RETURN.
The SET UP menu appears.
SET UP
>CH CAPTION/GUIDE
GO cH a
Use > i Exit &
3 Press++or~# to move the cursor (P) to CH
SET UP and press RETURN.
The CH SET UP menu appears.
CH SET uP
CABLE ON
Use ¢ Si exit
HON
4 press + ¢ or - + to move the cursor {(P) to CH
ERASE/ADD and press RETURN.
The CH ERASE/ADD menu appears.
GH ERASE /A00
» ERASE
CHO co
CHOP)
10
Select the cnannel
Use Exit a
5 erase and/or add the channel you want:
To erase an unwanted channel
(1) Make sure the cursor (®) 1s beside ERASE.
(2) Press CH +/~ to select the channel you
want to erase and,
Selected channel number
CH
ow CH ERASE/AOD
f
6) ERASE
' 400
©} MENU
x Select the channel
Use ¢ Gig Exit ie
(3) press RETURN.
The indication "-" appears beside the channel
number, showing that the channel 1s erased
from the preset memory.
"e
To add a channal that you want
(1) Press + # or ~ + to move the cursor (P) to ADD.
(2) Press the 0 — 9 buttons to select the channel you
want to add and press ENTER and,
Selected channel number
@
®
Q) Setect_the channet
Use 0 mp Exit aw
@
@
@
7,
©©C®
(3) press RETURN.
The indication "+" appears beside the channel
number, showing that the channel is added to
the preset memory.
=
6 To erase and/or add other channels, repeat
step 5.
7 When you finish, press MENU.
MENU fy
Notes
* If you erase or add a VHF or UHF channel, the cable TV
channel with the same number 1s also erased or added, and
vice versa.
« Erasing and adding channels are also available for the AUX
input. (KV-32V15 only)
Getting Started| 11
Setting cable TV on or off
For cable :box.control (Cable Mouse) users
: Refer to the supplied Cable Mouse marnualon how: :
: toset cable TV: . we
If you have connected the TV to a cable TV system, set
CABLE to ON, the factory setting. If not, set CABLE to
OFF.
You do not have to do this procedure if you execute
AUTO SET UP (page 10). Do this procedure only when
you want to set it manually.
1 Press MENU.
2 Press + ¢ or ~ + to move the cursor (>) to
SET UP and press RETURN.
3 Press + ¢ or - + to move the cursor (>)
to CH SET UP and press RETURN.
CH SET UP
*CABLE ON
AUTO PROGRAM
CH _ERASE/ADO
MENU
Use ¢ Gm Ex:t
4 Set CABLE to ON or OFF:
(1) Make sure the cursor (P) 1s beside CABLE and
press RETURN.
If the cursor 1s not beside CABLE, press + # or
— # to move the cursor and press RETURN.
(2) Press + # or — # to select ON or OFF and, press
RETURN.
CH SET UP
CABLE OFF
AUTO PROGRAM
CH ERASE/ AOD
MENU
Use @ Sm Ex:t @&
5 press MENU to return to the original screen.
Note
* If CH SET UP appears in black, the TV is set to a video input
and you cannot select CABLE. Press TV/VIDEO or TV so that
a channel number appears.
12 | Getting Started
ES AAP PEE AES NE ER AE CT ST EO TE
Presetting channels
For cable box controi (Cable Mouse) users: :
Refer to: the' supplied Cable Mouse manual ony how
. to. preset charinels. eye h o e d s PH ee
You can preset TV channels easily by using the AUTO
PROGRAM feature.
You do not have to do this procedure if you execute
AUTO SET UP (page 10). Do this procedure only when
you want to set it manually.
1 Press MENU.
2 Press + 4 or ~ + to move the cursor (Pm)
to SET UP and press RETURN.
3 Press + + or - + to move the cursor (>)
to CH SET UP and press RETURN.
CH_EAASE/A00
MENU
Use ¢ Gi@ Ext
4 Press + ¢ or - + to move the cursor (>)
to AUTO PROGRAM and press RETURN.
AUTO PROGRAM
"AUTO PROGRAM" appears on the screen and the
TV starts scanning and presetting channels
automatically. When all the receivable channels are
stored, "AUTO PROGRAM" disappears and the
lowest numbered channel is displayed.
5 Press MENU to return to the original screen.
Notes
« If the CH SET UP menu appears in black, the TV is set toa
video input and you cannot select AUTO PROGRAM. Press
TV/VIDEO or TV so that a channel number appears.
Presetting channels 1s also available tor the AUX input. (KV-
32V15 only)