Table of Contents
Advertisement
Available languages
Available languages
DANGER: SILICOSIS AND OTHER DUST WARNINGS
DO NOT USE SAND!
While the vacuum assisted reclaiming system on this product
does a good job of dust containment, breathing dust from silica
sand may cause silicosis, a fatal lung disease. Breathing dust dur-
ing blasting operations may also cause asbestosis and/or other
serious or fatal diseases.
A NIOSH-approved, well maintained abrasive blasting respira-
tor must be used by anyone blasting, anyone handling or using
media containing toxic substances or media with free crystalline
silica and anyone in the area of the dust. Harmful dust can remain
suspended in the air for long periods of time after blasting has
ceased, causing serious injury or death.
Before removing respirator, use an air monitoring instrument to
determine if the atmosphere is safe to breathe. Contact the local
OSHA or NIOSH office to determine the proper respirator for
your particular application.
READ THESE SAFETY PROCEDURES IN THEIR ENTIRETY
PARTS OF THE OPERATING INSTRUCTIONS ARE WITHIN
THESE WARNINGS.
These procedures are not intended to be exhaustive due to the
many variables in the abrasive blasting field. Therefore, we INSIST
that the hands, ears, mouth, nose and eyes be covered with the
appropriate safety protection at all times.
Assembly Instructions with Indented Parts List
CAUTION: Two person lift and assembly is recommended!
Injuries can occur when lifting and assembling heavy or large
objects.
Tools Required for Assembly: NOT INCLUDED
Make sure to open carton from side marked "Open This Side"
•
Phillips Screw Driver
•
Flathead Screw Driver
•
Adjustable Wrench
•
10mm, 13mm & 17mm Wrenches
•
Drill with ¼" bit (for cyclone)
•
3" Hole Saw (or knife for cutting center hole in lid for
cyclone)
CAUTION: Make sure to wear the proper PPE such as gloves
and safety glasses or goggles. Follow the safety warnings pro-
vided from the tool manufacturer.
5
Advertisement
Table of Contents
