Table of Contents
Advertisement
Available languages
Available languages
18. Locate suction hose (Z) and (1) hose clamp (AA). Slide
hose clamp onto one end of the hose. Slide hose and
clamp together over the exhaust port and tighten hose
clamp securely.
19. Cyclone setup: Using the provided template, cut the hole
pattern in a 5 gallon bucket lid (Not Included.) Using (6)
each of bolts (F) and nuts (G), install cyclone (CC) w/gas-
ket (DD) onto bucket lid and tighten fasteners. Fasten lid
onto bucket (not included.)
20. Slide one hose clamp (AA) on the suction hose (Z). Slide
hose and clamp together onto the side port of the cyclone
and tighten hose clamp securely.
21. Connect vacuum hose with cyclone adapter (FF) to top
port of cyclone.
13
Advertisement
Table of Contents
