Philips DTX6372-05A User Manual page 13

1. If you have the welcome message on-screen at the moment, press the SELECT button on
your remote. If you allready have the main menu go to step 3.
2. Choose option 5 getting started using the DOWN ARROW button, and press the SELECT
button.
The receiver will start to search for all available channels, as indicated on-screen.
3. If you already had the main menu on-screen
-
-
-
During the installation process the display on screen will indicate the number of channels
that have been found and the percentage of the installation that has been completed. You
will also see the message Your ONdigital box is searching for all available channels – this
may take about 20 minutes – please wait.
When complete, the display will briefly show 100%, the number of channels that have been
found and indicates that these are being stored. It will then display a list of channels.
• Press the UP or DOWN button to highlight the channel you want to watch followed by the
SELECT button to watch that channel.
12
Choose option 5 getting started in the same manner as above.
Highlight the store channels option using the DOWN ARROW button and press the
SELECT button.
Press the SELECT button again, the receiver will start to search for all available
channels, as indicated on-screen.