Table of Contents
Advertisement
13.
14.
15.
16.
17. Open the top door and replace the door rack; then, close the door.
16
Place the top door in the correct position and use the screws (2)
to attach the upper hinge (3). Hold the top door in place while
positioning them.
Replace the upper hinge cap (1).
Attach the hinge (14) onto the opposite side
using the screws. The screws should be
attached in the order shown in the figure
below. First, tighten the screw 1, followed
by screws 2. Then, screw on the adjustable
feet (11).
Place the bottom door onto the bottom
hinge and hold them in place. Rotate the
middle hinge by 180°. Place the washer in
the correct position and adjust the position
of the middle hinge so that you can install
and fix the bottom door.
Advertisement
Table of Contents
