Advertisement
I/O Circuit Diagrams
Emitter
(Brown) +V
6.
(Green) Interference prevention output
6.6k
(Pink) Test input
6.6k
0.1 F
6.6k
470
(Orange) Large multi-purpose indicator input
6.6k
0.47 F
(Blue) 0V
Receiver
(Brown) +V
22k
(Gray) Frequency setting input
540k
(White) Lockout output (SSD)
540k
(Black) Control output (OSSD)
(Blue) 0V
Basic Wiring
<In case of using I/O circuit for PNP output>
(Green) Interference prevention output
(Pink) Test input
(Orange) Large multi-purpose indicator input
(Brown) +V
(Blue) 0V
Gray cable
(Brown) +V
Gray cable
(White) Lockout output (SSD)
with black line
(Black) Control output (OSSD)
(Blue) 0V
(Gray) Frequency setting input
<In case of using I/O circuit for NPN output>
(Green) Interference prevention output
(Pink) Test input
(Orange) Large multi-purpose indicator input
(Brown) +V
(Blue) 0V
Gray cable
(Brown) +V
Gray cable
(White) Lockout output (SSD)
with black line
(Black) Control output (OSSD)
(Blue) 0V
(Gray) Frequency setting input
<Reference>
K1 External device (Forced guided relay or magnetic contactor)
Ramco Innovations
<In case of using I/O circuit for PNP output>
Frequency 1 light curtain
Frequency 2 light curtain
+
24V DC
±20%
-
* S1
ON Vs
OFF Open
Notes 1) The orange indicator lights up when the input wire for the large multi-purpose indicator (orange) is connected
<In case of using I/O circuit for NPN output>
Load
K1
Frequency 1 light curtain
+
24V DC
±20%
-
Load
K1
Frequency 2 light curtain
* S1
ON 0 to +2.5V
OFF Open
Note The orange indicator lights up when the input wire for the large multi-purpose indicator (orange) is connected to
<Reference>
K1 External device (Forced guided relay or magnetic contactor)
www.PanasonicSensors.com
Wiring for Test Input Function / Large Multi-purpose Indicator Function /
Interference Prevention Function
(Brown) +V
(Pink) Test input
(Orange) Large multi-purpose indicator input
(Blue) 0V
(Green) Interference prevention output
Gray cable
(Brown) +V
Gray cable
(White) Lockout output (SSD)
with black line
(Black) Control output (OSSD)
(Blue) 0V
(Gray) Frequency setting input
(Green) Interference prevention output
(Pink) Test input
(Brown) +V
(Orange) Large multi-purpose indicator input
(Blue) 0V
Gray cable
(Brown) +V
Gray cable
(Gray) Frequency setting input
with black line
(White) Lockout output (SSD)
(Black) Control output (OSSD)
(Blue) 0V
<Frequency setting input>
2.5V to Vs
Frequency 1 setting Open
Frequency 2 setting +V
to the +V terminal, and turns OFF when it is disconnected.
2) Vs is the applying supply voltage.
(Brown) +V
(Pink) Test input
(Orange) Large multi-purpose indicator input
(Blue) 0V
(Green) Interference prevention output
Gray cable
(Brown) +V
Gray cable
(White) Lockout output (SSD)
with black line
(Black) Control output (OSSD)
(Blue) 0V
(Gray) Frequency setting input
(Green) Interference prevention output
(Pink) Test input
(Brown) +V
(Orange) Large multi-purpose indicator input
(Blue) 0V
Gray cable
(Brown) +V
Gray cable
(White) Lockout output (SSD)
with black line
(Black) Control output (OSSD)
(Gray) Frequency setting input
(Blue) 0V
<Frequency setting input>
Frequency 1 setting Open
Frequency 2 setting +V
the +V terminal, and turns OFF when it is disconnected.
(800) 280-6933
* S1
+
24V DC
±20%
-
* S1
Load
K1
* S1
Load
K1
* S1
+
24V DC
±20%
-
* S1
Load
K1
* S1
Load
K1
Advertisement
