Advertisement
Regulatory information
Compliance statement (part 15.19)
This device complies with part 15 of the FCC rules. Operation is
subject to the following two conditions:
This device may not cause harmful interference, and
This device must accept any interference received, including
interference that may cause undesired operation.
WARNING (part 15.21)
Changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to
operate the equipment.
RF EXPOSURE (OET bulletin 65)
To comply with CC RF exposure requirements for mobile
transmitting devices, this transmitter should only be used or
installed at locations where there is at least 20cm separation
distance between the antenna and all persons.
Manufacturer performance specification
The BAGTAG device has been certified according to IEC 61000-4-
3, the UHF RFID scanning function of the Airport interface of the
BAGTAG device could be sensitive to radiated emissions
between 600Mhz and 700Mhz resulting in performance criterion
B. After the influencer of the emissions in the afore mentioned
spectrum have stopped, the BAGTAG device will self-recover its
functionality with respect to the UHF RFID scanning function
without
operator
conditions the afore mentioned emissions should not be present
in the environment where the BAGTAG is used with the UHF
RFID scanning function.
intervention.
During
normal
operating
Advertisement
