Table of Contents
Advertisement
•
Network pairing:
Turn on the whiteboard and enable the Hotspot Network. If you need to access an external network
during screen casting, turn on and connect to a wireless or wired network at the same time
Select Connect: After connecting your device to the hotspot network of the whiteboard, run the Airgo
Cast software on your device, find the corresponding whiteboard device name, enter the PIN code, and
after the connection is successful, you can start to cast the screen
Settings
1.
PIN code & Refresh Time: On by default. Once enabled, you need to enter the corresponding
PIN code to connect the IFPD screen projection. Depending on the refresh interval, the project code
is automatically updated regularly.
2.
Split screen: On by default. After enabled, multiple devices can be screenprojected at the same
time.
3.
Quick Float: On by default. The shortcut float displays the projection code or IP information at
the top of the IFPD interface. Click on the shortcut float to control the operation, please refer to the
[Quick Float] page for details.
4.
AirPlay: On by default. Support iPhone, Mac , iPad and other Apple devices that come with it.
5.
DLNA: On by default. Support third-party players to mirror screens via DLNA protocol. Noted
that DLNA is mutually exclusive with split-screen function.
6.
Update: Click "AirgoCast" to explore OTA updates.
46/70
FAYTECH
installation, safety and user manual © 2024 by Pyramid Computer GmbH · www.pyramid.de
®
Advertisement
Table of Contents
