3.3.2 Product Operation
Introduction to startup & shutdown:
•
Make sure that the power is connected and in a safe environment.
•
Make sure that the power is in a normal power supply state. Connect the power cord plug to the
power board, then the product is ready to be turned on.
•
The machine has a one key boot function that automatically starts the computer that comes
with it. The product is turned on when the power indicator becomes white (the red light means it is
in standby state) and it enters the startup screen.
•
After using the product, exit the operating software, turn off the computer system, then turn off
the product switch, and finally turn off the main power switch.
4. HARDWARE SPECIFICATIONS
4.1 Front Panel & Interfaces
Left interface panel
12/70
FAYTECH
installation, safety and user manual © 2024 by Pyramid Computer GmbH · www.pyramid.de
®
48MP Camera
Loudspeakers
Right interface panel