Table of Contents
Advertisement
Drive System
Maintenance
Tire Air Pressure
The following table shows the appropriate air pressure
for the tires as installed at the factory.
Important:
Always check the information on
the actual tires for the correct air pressure
requirement.
Model
60212, 60213, and 60216
60218, 60219, and 60220
Inspecting the Tires
Service Interval: Before each use or daily
WARNING
Failure to maintain correct tire pressure
may result in tire failure and loss of control,
resulting in property damage and serious
injury or death.
• Check the tire pressure frequently to
ensure proper inflation. If the tires are not
inflated to the correct pressure, they will
wear prematurely.
• Inspect the tire condition before towing
and after any operating accident.
The DOT tire information is located on the side of
each tire. This information gives load and speed
ratings. Replacement tires should have the same or
better ratings
Note:
Ensure that any tires installed on your machine
meet or exceed the weight requirements of your
machine as listed in
Specifications (page
1.
Visually inspect the tires for damage and wear
(Figure 56
and
Figure
Maximum Air Pressure
414 kPa (60 psi)
241 kPa (35 psi)
15).
57).
1. Example of tire wear caused by underinflation
1. Example of tire wear caused by overinflation
2.
Ensure that the tires are inflated to the correct
air pressure; refer to
Important:
The most common cause of tire
trouble is under-inflation. Maintain full air
pressure.
Torquing the Wheel Lug
Nuts
Service Interval: After each use
Torque the wheel lug nuts initially and after towing.
Torque the wheel lug nuts 108 to 122 N∙m (80 to 90
ft-lb), in the sequence shown in
38
Figure 56
Figure 57
Tire Air Pressure (page
Figure
58.
Figure 58
g020836
g010293
38).
g021107
Advertisement
Table of Contents
