Advertisement
KRC-1054R
DISASSEMBLY FOR REPAIR
1. Straighten the 3 claws ( @) on the chassis using a
pair of pliers, etc.
2. Remove the 5 screws ( @). As the screw marked
(@) * is of a different type from other screws, be
careful to use it in the same position at the assem-
bly.
3. Remove the lever and the screw (@), and remove
the board unit.
=
. Remove the 5 screws (@).
2. While pushing the upper and lower sections (® ) of
the front case, open the lower section (@ ).
*Be save to engage the 5 claws (@)
securely.
1. When assembling the rear case, fit the spring (@)
into the hole on the case and attach the 5 screws.
Advertisement
