Advertisement
KRO-1004R
MECHANISM OPERATION DESCRIPTION
32
3. Change from load gear to mode gear
When the load gear (38) further more rotates @, the boss un-
der it pushes against the boss of the mode gear (43)...@, so
that the mode gear (43) rotates after the shift of its non-toothed
section... @.
Thus, the load gear (38) stops rotation on account of its non-
toothed section coming.
4.
REW
When
the mode gear (43) rotates @, the FR plate (26) under
it moves@. The cam of the FR plate (26) works to rotate the
FR arm (24)... @.
Further, the FR arm (24) moves to transmit the rotation of the
flywheel (8) to the reel gear (31)... @.
At this time, a slot (REW hole) of the FR plate (26) is detected
by the mode sensor (PH3)...@, to stop the rotation of the sub
motor.
For REW or FF, due to the groove of the FR plate (26)...®,
the head plate (805) advances @ so that the head moves to
a position at which T-ADV
is feasible.
Faso
PH3
cc
43
26
Advertisement
