Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for SHOWTEC SPIDEREC1024
Summary of Contents for SHOWTEC SPIDEREC1024
- Page 1 SPIDEREC1024 6Way DMX Signal Booster/Splitter User Manual...
-
Page 2: What Is Included
INTRODUCTION The SPIDEREC1024 is a very useful and versatile DMX tool. It is more than a DMX recorder, it is a DMX signal booster, ArtNet to DMX node, DMX merger. To optimize the performance of this product, please read the user manual carefully before use. -
Page 3: Product Overview
Features Supports ArtNet and DMX 1024 channels DMX in & out Real-time or step-by-step record from DMX / Artnet (via Lan or WiFi) 14 Memories and each up to 20 hours can be stored in SD card Replay can run in solo or loop mode Replay can run on iPad/iPhone via TouchOSC Bridge functions: DMX input to DMX output (signal booster) -
Page 4: Menu Operation
OPERATING INSTRUCTIONS MENU OPERATION MENU System Ready Recorder V2.0 Bridge Mode01 Bridge Mode02 Select Bridge Mode [DMXi->DMXout] [DMXin->LAN] Bridge Mode03 [LAN->DMXout] Bridge Mode04 [WiFi->DMXout] Bridge Mode05 [WiFi->LAN] Bridge Mode06 [DMX MERGE] System Setup ENTER Upload new? Press ENTER to update your device with new software MENU-N | ENTER-Y stored in the SD card [New software]... - Page 5 OPERATING INSTRUCTIONS BRIDGE Under BRIDGE, the unit works as a DMX signal booster, ArtNet to DMX converter, DMX Merger. Press BRIDGE button and its LED is lit up. Then use MENU/ENTER/UP/DOWN to select different modes as below. DMX signal booster Bridge Mode01 [DMXin->DMXout] Bridge Mode02...
- Page 6 OPERATING INSTRUCTIONS Bridge Mode04 [WiFi->DMXout] In this mode, the unit converts ArtNet signal via WiFi to DMX signal. WiFi DMX cable WiFi Notes: 1). connect your lighting console to the Recorder’s WiFi hotspot [password: 12345678]. 2). Set IP address of your lighting console in the same network range as Recorder’s WiFi IP address [2.0.0.x].
- Page 7 RECORD Lighting show can be recorded from DMX or ArtNet (via Ethernet or WiFi). There are 14 memories for recording and each can be stored up to 20 hours on the SD card. 1. Recording can be made as real time (Rec over time) or step-by-step. So, we need to set Memory mode before recording.
- Page 8 Memory number MEM1 00:00:00 Recording time err: - Lframe: 000 “err:- ” means no error. when there is error during recording, then error code displays err: x (x=code). 5. When recording is over time, press button to start recording, ▌▌ to pause and to end recording.
- Page 9 1. Download TouchOSC from Apple Stores/Google Play and install it on your Phone/Pad. 2. Run TouchOSC on your iPhone/iPad. 3. Install TouchOSCEditor.exe on your PC/Laptop from the SD card included your Show Recorder download from https://hexler.net/software/touchosc). Run it and click “Open”.
- Page 10 4.Select “RECORDER1024.touchosc” file from SD card and then click Open . 5. Click “Sync” on TouchOSCEditor. To sync the current layout to your iPhone/iPad, make sure it is connected to the same WiFi network as this computer.
- Page 11 6. Click LAYOUT on your iPhone/iPad, then click Add and you will see the name of your computer. Click it to add the layout from your computer. 7. Select RECORDER1024 from layout list. Then click “OSC: Not configured” and set Host (2.0.0.0), Ports (6454) as below.
- Page 12 8. Click Done and you will see the layout on your iPhone/iPad. But all buttons and faders are not actived. 9. To operate your iPhone/iPad to control replay, you need to connect your iPhone/iPad to the WiFi hotspot of DMXRECORDER unit (password: 12345678).
- Page 13 10. Now your TouchOSC is ready.
-
Page 14: Software Updating
Software updating The software can be upgraded via SD card as following steps: 1) Copy the new software (SSCR10AM & SSCR10AS) to the root directory of SD card. 2) Insert SD card and press Menu button till “SYSTEM setup [new software]” shows on display.
Need help?
Do you have a question about the SPIDEREC1024 and is the answer not in the manual?
Questions and answers