Operation - Lifan LF1000 PRO Owner's Manual

General gasoline engine
Table of Contents

Advertisement

1. Operation warning
Before using the gasoline engine for the first time, please read the chapter of safety precautions and
pre-use inspection.
In order to give full play to the performance, it is recommended that the new product should be run
in for 15 minutes before use.
For your safety, do not use gasoline engines in confined areas, such as garages. The gas discharged
by the gasoline engine contains toxic carbon monoxide. In a confined area, carbon monoxide can
accumulate quickly, making people sick or even dead.
Toxic gas of carbon monoxide in the exhaust gas can accumulate to
dangerous concentrations in confined areas. Inhalation of carbon
monoxide can cause unconsciousness and even death.
It is forbidden to operate gasoline engines in confined areas,
including the semi-ventilated areas with people on site.
Read the safety warning content of the device equipped with this gasoline engine regarding the start,
stop or operation of the gasoline engine.
Do not use gasoline engines when the slope is greater than 20 ° .
2. Start the engine
(1) If the fuel tank is equipped with a fuel cock, make sure that the fuel cock is set to "ON" position
before starting the gasoline engine.
(2) Turn the potentiometer knob anticlockwise to the initial idle speed position.
(3) Operate the starting motor.
Starting motor:
Press the one-button start switch and hold it until the gasoline engine starts.
If the gasoline engine does not start successfully after more than 5 seconds, release the switch for
10 seconds before re-operation.
IMPORTANT
Do not use the starting motor for over 5s as it will cause the starting motor to overheat or damage.
(4) Warm up the gasoline engine for 2-3 minutes.

Operation

!WARNING
7
ONE-BUTTON START SWITCH
一键
POTENTIOMETER KNOB
电位

Advertisement

Table of Contents
loading

Table of Contents