Pre-Use Inspection - Lifan LF1000 PRO Owner's Manual

For your safety and to make your equipment more durable, please take some time to check the
condition of the gasoline engine before operation. Make sure the faults is cleared or you can contact
your dealer to solve the problem.
Improper maintenance or operation of the gasoline engine
without troubleshooting may cause serious personal injury or
even death.
Before each operation, a pre-use inspection must be performed
to eliminate various faults.
Make sure that the engine is placed on a level ground before pre-use inspection.
Check the following points before each start:
1. General conditions
(1) Check the oil and fuel for leaks.
(2) Clear the excess dirt or debris, especially around the muffler.
(3) Check if there is a sign of damage.
(4) Check the position of all hoods and covers and check the bolts, nuts and screws for fastening.
2. Gasoline engine
(1) Check the fuel level. Filling with fuel before operation can avoid or reduce the occurrence of
interruption to operation due to the need for refueling.
(2) Check the oil level. The low oil level will cause damage for gasoline engine during operation.
(3) Check the air cleaner element. The filthy air cleaner will limit air to enter the carburetor and
reduce the performance of gasoline engine.
(4) Check the devices equipped with this gasoline engine. Before starting the gasoline engine, please
read the instruction manual of the devices to understand the operation warning and the steps to be
followed.

Pre-use Inspection

！WARNING
6