Table of Contents
Advertisement
light > Brightness.
Lounge light brightness level selection.
Duration
Settings > Display and sound > Ambilight > Lounge
light > Duration.
Set the duration (in minutes) of the Lounge light mode.
Ambisleep
Ambisleep simulates sunset to help you unwind before
you fall asleep. At the end of simulation, TV will
automatically switch to standby.
Start Ambisleep
Settings > Display and
sound > Ambilight > Ambisleep > Start Ambisleep.
Select to turn on Ambisleep.
Ambisleep colour selection
Settings > Display and
sound > Ambilight > Ambisleep > Ambisleep colour
selection.
Select your preferred Ambisleep colour from the colour
palette and tune it via colour sliders to your preference.
Brightness
Settings > Display and
sound > Ambilight > Ambisleep > Brightness.
Set the starting brightness of the Ambisleep.
Duration
Settings > Display and
sound > Ambilight > Ambisleep > Duration.
Set the duration (in minutes) of the Ambisleep.
Sound
Settings > Display and
sound > Ambilight > Ambisleep > Sound.
Select the nature sound you like to use during
Ambisleep.
The available nature sounds are:
• Campfire
• Rain
• Rainforest
• Tropical beach
• Waterfall
• Silent
Advanced Ambilight Settings
Neutralise the influence of a coloured wall on the
Ambilight colours
Settings > Display and
sound > Ambilight > Advanced > Wall colour behind
the TV.
Select the colour of the wall behind the TV and the TV
will modify the Ambilight colours to appear as they are
intended.
Set Ambilight to turn off immediately or slowly fade
out when you switch off the TV
Settings > Display and
sound > Ambilight > Advanced > Fade out to off.
Set the fade out to off time in seconds or select
Immediate to turn off the Ambilight immediately.
Ambilight animation
Settings > Display and
sound > Ambilight > Advanced > Ambilight animation.
Enable or disable to display Ambilight animation* during
TV wake-up from mains on.
* Note: not applicable when Power on behavior is set to
Last used input.
Ambilight Extension
Philips Wireless Home Speakers
Note: Before starting the setup, make sure the TV and
your Philips Wireless Home Speakers are connected to
the same Wi-Fi network.
With Ambilight extension, you can set up your Philips
Wireless Home Speakers to follow the colours of
Ambilight. Before starting the setup, make sure your
Philips Wireless Home Speakers are turned on and
connected to the same Wi-Fi network as the TV. Please
give some time for the speakers to be ready if you have
just turn it on before starting.
Press and hold the LED link button on the speaker for 3
seconds to start linking. If you have more than 1 speaker,
repeat the same action for each speaker and press BACK
key when you are done. The LED link button is located at
the Philips Wireless Home Speakers.
52
Advertisement
Table of Contents
