Sources; Switch To A Device; Airplay And Homekit - Philips OLED809 Series User Manual

11. Sources

11.1. Switch to a device

From the list of Sources, you can switch to any of the
connected devices. You can switch to a tuner to watch
TV or open the content of a connected USB storage
device. You can switch to your connected devices to
watch their programme, a digital receiver or a Blu-ray
Disc player.
To switch to a connected device:
1 - Press  SOURCES to open the Sources menu.
2 - Select one of the item in the source list and press OK.
The TV will show the programme or content of the
device.
* Note: HDMI device listed in Source list as Unregistered
cannot be controlled with the TV's remote control as
communication protocol is limited.

11.2. AirPlay and HomeKit

Streaming contents via AirPlay
You can stream the media files from Apple devices to
your TV via AirPlay. Go to  Settings > Channels and
inputs > Apple AirPlay and HomeKit to enter AirPlay
and HomeKit Settings page and make sure AirPlay is
turned On. Your Apple device must be connected to the
same Wi-Fi home network as your TV to stream contents.
Add your TV to Apple HomeKit
To add your TV to HomeKit and control your TV via Apple
devices:
1 - Go to  Settings > Channels and inputs > Apple
AirPlay and HomeKit to enter AirPlay and HomeKit
Settings page.
2 - Select Set UP under HomeKit section to generate a
QR code on your TV.
3 - On your Apple device, open the Home app and tap
Add  and then scan the QR code on TV.
4 - Follow the instructions on your Apple device and join
your TV to HomeKit.
40