Table of Contents
Advertisement
(within 1m distance) during pairing in order to ensure
success.
3 - If the TV does not launch the voice control field when
press , pairing was unsuccessful.
4 - It is advisable to wait until the set has fully started up
and launched all background processes before pairing
mode is entered as the toast message containing further
instructions may appear too late, thereby negatively
impacting the pairing procedure.
Pairing or pairing again
If the pairing with the remote control was lost, you can
pair the TV with the remote control again.
You can press Home + Back key (approximate for 3
seconds) for pairing.
Alternatively, go to Settings > Remote and
accessories > Remote control settings > Pair remote
control, then follow the on-screen instructions.
A message appears when the pairing is successful.
Remote Control Software
Settings > Remote and accessories > Remote control
settings > Remote control info
Once the remote control is paired, you can check the
current remote control software version.
Settings > Remote and accessories > Remote control
settings > Update remote control software
Check available remote control software for updates.
4.3. Voice Search
You can search for videos, music or anything else on the
Internet by simply using your voice. You can speak into
the microphone on the remote control.
You need to pair the remote control to the TV before use
voice search.
To use Voice:
1 - Press and hold the key on remote control, the blue
light on the remote control lights up and the search field
opens, the microphone is active.
2 - Speak out what you are looking for with clear
pronunciation. Once the voice input is done, release the
key to start the search. It might take some time for the
results to appear.
3 - In the list of search results, you can select the item you
want.
4.4. IR Sensor
The TV can receive commands from a remote control
that uses IR (infrared) to send commands. If you use such
a remote control, always make sure you point the remote
control at the infrared sensor on the front of the TV.
Warning
Do not put any objects in front of IR sensor of the TV, it
may block the IR signal.
4.5. Charging and Cleaning
Wired and Wireless charging the remote control
Refer to the Quick Start Guide in your product package
for detailed information about charging the remote
control.
If the TV does not react on a key press on the remote
control or charging notification is received on TV, you
can charge the remote control with the USB type-c
connector in front of the remote control.
To charge the remote control, connect it with the USB
cable that come with your remote control to your USB
power supply device. The input power of the remote
control is 5.0V 0.5A, please check the power voltage
before connecting to charge.
When the remote control is charging, the microphone
LED indicator on top of remote control will blink or turn
on:
• White LED at microphone hole will be glowing during
charging.
• White LED at microphone hole turns on at full charge.
• No LED blinking if any charging fault detected.
Wireless charging coil is located at the Philips logo at the
reverse side of the remote control. Using a compatible Qi
wireless charger, the remote control can be charged by
placing it on the wireless charging device/pad*. If the
remote control is not aligned properly with the wireless
charger, the white LED may blink rapidly.
* Note: Wireless charging device/pad is not included in
product package.
Cleaning
Your remote control is treated with a scratch-resistant
coating.
To clean the remote control, use a soft damp cloth. Never
12
Advertisement
Table of Contents
